Using the image item
Sending images from Arduino and displaying them in RoboRemo
To make this project, you need:
- Arduino UNO (or similar) + USB cable for it
- BlueSMiRF module or similar
- DC adapter for Arduino
- wires
- Android phone with RoboRemo app installed
- Arduino UNO (or similar) + USB cable for it
- BlueSMiRF module or similar
- DC adapter for Arduino
- wires
- Android phone with RoboRemo app installed
|
Steps:
1) upload the code to the Arduino 
2) connect the Bluetooth module to the Arduino as described in the sketch
3) power the Arduino with the DC adapter 4) open RoboRemo and follow the video to build the interface 5) enjoy :) |
| ||
In this example I use small images (3 by 5 pixels), but you can easily modify it to use bigger images.
